SUN HYDRAULICS
HDDAMCV624
$164.11 USD
- SUN HYDRAULICS
- Material:HDDAMCV624
- Model:HDDA-MCV@624
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDAMCV624 (HDDAMCV624) is a solenoid-after check cartridge designed for lift-lower applications, featuring a hybrid valve that integrates a direct-acting solenoid poppet valve with a check function. The check valve allows flow from inlet port 2 to system port 1, while the de-energized solenoid blocks flow from port 2 to port 3. This cartridge is suitable for load-holding applications and can be directly integrated into actuators. It boasts a fatigue-rated solenoid tube assembly for service up to 5000 psi (350 bar) and offers several manual override options, though manual overrides are not compatible with weatherized coils. The wet armature design exposes the working fluid to heat generated by the coil, which may affect certain fluids like water-glycol mixtures over time. Coils are interchangeable within the Sun Series 1 solenoid products and can be mounted in either direction, with options providing environmental protection up to IP69K. The valve features Sun's floating style construction to reduce internal part binding risks due to installation torque or cavity machining variations. It fits in cavity T-11A, has a capacity of 10 gpm (40 L/min), and operates with a maximum pressure of 5000 psi (350 bar). Typical response time is around 50 ms, with maximum leakage at 10 drops/min under specified conditions. The check cracking pressure is set at 30 psi (2 bar), and it supports switching frequencies up to 15,000 cycles per hour. Manual override requires a force of approximately 5 lbs/1000 psi at Port 1, with an override stroke of .10 inches (2.5 mm). The valve's hex size is .78 inches (22.2 mm), requiring an installation torque between 30 and 35 lbf ft (41 - 47 Nm). Seal kits are available in Viton material for both cartridge and coil components.
The Sun Hydraulics HDDAMCV624 (HDDAMCV624) is a solenoid-after check cartridge designed for lift-lower applications, featuring a hybrid valve that integrates a direct-acting solenoid poppet valve with a check function. The check valve allows flow from inlet port 2 to system port 1, while the de-energized solenoid blocks flow from port 2 to port 3. This cartridge is suitable for load-holding applications and can be directly integrated into actuators. It boasts a fatigue-rated solenoid tube assembly for service up to 5000 psi (350 bar) and offers several manual override options, though manual overrides are not compatible with weatherized coils. The wet armature design exposes the working fluid to heat generated by the coil, which may affect certain fluids like water-glycol mixtures over time. Coils are interchangeable within the Sun Series 1 solenoid products and can be mounted in either direction, with options providing environmental protection up to IP69K. The valve features Sun's floating style construction to reduce internal part binding risks due to installation torque or cavity machining variations. It fits in cavity T-11A, has a capacity of 10 gpm (40 L/min), and operates with a maximum pressure of 5000 psi (350 bar). Typical response time is around 50 ms, with maximum leakage at 10 drops/min under specified conditions. The check cracking pressure is set at 30 psi (2 bar), and it supports switching frequencies up to 15,000 cycles per hour. Manual override requires a force of approximately 5 lbs/1000 psi at Port 1, with an override stroke of .10 inches (2.5 mm). The valve's hex size is .78 inches (22.2 mm), requiring an installation torque between 30 and 35 lbf ft (41 - 47 Nm). Seal kits are available in Viton material for both cartridge and coil components.
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ