SUN HYDRAULICS
HDDAMCV848
$174.23 USD
- SUN HYDRAULICS
- Material:HDDAMCV848
- Model:HDDA-MCV@848
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDAMCV848 (Material Number: HDDAMCV848) is a solenoid-after check cartridge valve designed for versatile hydraulic applications, particularly in lift-lower scenarios. This hybrid valve combines a direct-acting solenoid poppet valve with a check function, allowing flow from inlet port 2 to system port 1 and blocking flow from port 2 to port 3 when the solenoid is de-energized. It can be directly integrated into actuators, making it suitable for load-holding applications. The solenoid tube assembly is rated for fatigue at pressures up to 5000 psi (350 bar), ensuring durability in demanding environments. The valve features several manual override options, although it's important to note that manual overrides are not compatible with weatherized coils. This cartridge employs a wet armature design, where the working fluid surrounds the armature and absorbs heat generated by the coil. Users should be cautious of fluid breakdown in water-glycol mixtures over time due to this heating effect. The interchangeable coils with other Sun Series 1 solenoid products enhance flexibility in installation, and they can be mounted in either direction on the tube. Coil connector options provide ratings up to IP69K for robust environmental protection. The HDDAMCV848 incorporates Sun's floating style construction, minimizing internal part binding due to excessive installation torque or cavity-cartridge machining variations. With a capacity of 10 gpm (40 L/min) and a response time of approximately 50 ms, this valve ensures efficient operation. It has a maximum leakage rate of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar) and supports switching frequencies up to 15,000 cycles per hour. The manual override requires a force of approximately 5 lbs/1000 psi at Port 1 and has a stroke of .10 inches (2.5 mm).
The Sun Hydraulics HDDAMCV848 (Material Number: HDDAMCV848) is a solenoid-after check cartridge valve designed for versatile hydraulic applications, particularly in lift-lower scenarios. This hybrid valve combines a direct-acting solenoid poppet valve with a check function, allowing flow from inlet port 2 to system port 1 and blocking flow from port 2 to port 3 when the solenoid is de-energized. It can be directly integrated into actuators, making it suitable for load-holding applications. The solenoid tube assembly is rated for fatigue at pressures up to 5000 psi (350 bar), ensuring durability in demanding environments. The valve features several manual override options, although it's important to note that manual overrides are not compatible with weatherized coils. This cartridge employs a wet armature design, where the working fluid surrounds the armature and absorbs heat generated by the coil. Users should be cautious of fluid breakdown in water-glycol mixtures over time due to this heating effect. The interchangeable coils with other Sun Series 1 solenoid products enhance flexibility in installation, and they can be mounted in either direction on the tube. Coil connector options provide ratings up to IP69K for robust environmental protection. The HDDAMCV848 incorporates Sun's floating style construction, minimizing internal part binding due to excessive installation torque or cavity-cartridge machining variations. With a capacity of 10 gpm (40 L/min) and a response time of approximately 50 ms, this valve ensures efficient operation. It has a maximum leakage rate of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar) and supports switching frequencies up to 15,000 cycles per hour. The manual override requires a force of approximately 5 lbs/1000 psi at Port 1 and has a stroke of .10 inches (2.5 mm).
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ