SUN HYDRAULICS
HDDATCV224
$194.59 USD
- SUN HYDRAULICS
- Material:HDDATCV224
- Model:HDDA-TCV@224
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics HDDATCV224 (HDDATCV224) is a solenoid-operated check cartridge valve that combines a direct-acting solenoid poppet valve with a check function. This hybrid valve allows flow from inlet port 2 to system port 1, with flow from port 2 to port 3 blocked when the solenoid is de-energized. Primarily used in lift-lower applications, this valve can be integrated directly into an actuator, making it suitable for load-holding scenarios. The solenoid tube assembly is designed to withstand fatigue at pressures up to 5000 psi (350 bar), and the valve incorporates Sun's floating style construction to prevent internal part binding due to installation torque or machining variations. The HDDATCV224 offers several manual override options, including configurations without manual override, although these are not compatible with weatherized coils. The manual control assembly has a mechanical life expectancy of approximately 7,000 cycles and requires a force of 5 lbs at 1000 psi for operation. The valve features a wet armature design where working fluid surrounds the armature, potentially impacting performance if the coil remains energized for extended periods. This design consideration is crucial when using fluids like water-glycol mixtures that degrade under heat exposure. Coils for this cartridge are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction. They also offer connector options rated up to IP69K for enhanced environmental protection. With a capacity of 10 gpm (40 L/min) and response time typically around 50 ms, this valve meets demanding operational requirements while ensuring minimal leakage at maximum conditions\u201410 drops/min at 5000 psi. The HDDATCV224 is ideal for applications requiring reliable control in high-pressure environments.
The Sun Hydraulics HDDATCV224 (HDDATCV224) is a solenoid-operated check cartridge valve that combines a direct-acting solenoid poppet valve with a check function. This hybrid valve allows flow from inlet port 2 to system port 1, with flow from port 2 to port 3 blocked when the solenoid is de-energized. Primarily used in lift-lower applications, this valve can be integrated directly into an actuator, making it suitable for load-holding scenarios. The solenoid tube assembly is designed to withstand fatigue at pressures up to 5000 psi (350 bar), and the valve incorporates Sun's floating style construction to prevent internal part binding due to installation torque or machining variations. The HDDATCV224 offers several manual override options, including configurations without manual override, although these are not compatible with weatherized coils. The manual control assembly has a mechanical life expectancy of approximately 7,000 cycles and requires a force of 5 lbs at 1000 psi for operation. The valve features a wet armature design where working fluid surrounds the armature, potentially impacting performance if the coil remains energized for extended periods. This design consideration is crucial when using fluids like water-glycol mixtures that degrade under heat exposure. Coils for this cartridge are interchangeable with other Sun Series 1 solenoid products and can be mounted in either direction. They also offer connector options rated up to IP69K for enhanced environmental protection. With a capacity of 10 gpm (40 L/min) and response time typically around 50 ms, this valve meets demanding operational requirements while ensuring minimal leakage at maximum conditions\u201410 drops/min at 5000 psi. The HDDATCV224 is ideal for applications requiring reliable control in high-pressure environments.
This solenoid-after check cartridge is a hybrid valve incorporating a direct acting solenoid poppet valve teed in after the check function. The check valve flow is from the inlet (port 2) to the system (port 1). With the solenoid de-energized flow from (port 2) to (port 3) is blocked. This combination valve is typically used in lift/lower applications and can be integrated directly into the actuator.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- Suitable for load holding applications.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Check Cracking Pressure | 30 psi2 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Seal kit - Cartridge | Viton: 990-011-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ