SUN HYDRAULICS
NCFCKAN
$133.04 USD
- SUN HYDRAULICS
- Material:NCFCKAN
- Model:NCFC-KAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics NCFCKAN (NCFCKAN) is a versatile needle valve with a reverse flow check, designed for precise flow regulation. This fully adjustable orifice allows for smooth control from fully closed to the maximum orifice diameter, ensuring optimal performance in various applications. The integral high-capacity check valve facilitates unrestricted flow from port 2 to port 1, although it is not pressure compensated. The design incorporates a balanced adjustment mechanism for easy operation even under high pressures, and the sharp-edged orifice minimizes variations due to viscosity changes. This model features Sun's floating style construction, reducing the risk of internal parts binding from excessive torque or machining variations. The NCFCKAN fits within the Cavity T-16A Series 3 and has a capacity of 15 gpm (60 L/min) with a maximum operating pressure of 5000 psi (350 bar). It exhibits minimal leakage at 110 SUS (24 cSt), with only five drops per minute (0.3 cc/min), ensuring efficient performance. The adjustment range spans 5.5 counterclockwise turns from fully closed to fully open, allowing fine-tuning to suit specific needs. Installation requires a valve hex size of 1-1/4 inches (31.8 mm) and torque between 150-160 lbf ft (203-217 Nm). The internal adjustment screw uses a hex size of 5/32 inches (4 mm), while the locknut has a hex size of 9/16 inches (15 mm) and requires torque between 80-90 lbf in (9-10 Nm). Weighing in at 1.30 lb (0.60 kg), this needle valve also supports Viton seal kits for enhanced durability and compatibility with various fluids.
The Sun Hydraulics NCFCKAN (NCFCKAN) is a versatile needle valve with a reverse flow check, designed for precise flow regulation. This fully adjustable orifice allows for smooth control from fully closed to the maximum orifice diameter, ensuring optimal performance in various applications. The integral high-capacity check valve facilitates unrestricted flow from port 2 to port 1, although it is not pressure compensated. The design incorporates a balanced adjustment mechanism for easy operation even under high pressures, and the sharp-edged orifice minimizes variations due to viscosity changes. This model features Sun's floating style construction, reducing the risk of internal parts binding from excessive torque or machining variations. The NCFCKAN fits within the Cavity T-16A Series 3 and has a capacity of 15 gpm (60 L/min) with a maximum operating pressure of 5000 psi (350 bar). It exhibits minimal leakage at 110 SUS (24 cSt), with only five drops per minute (0.3 cc/min), ensuring efficient performance. The adjustment range spans 5.5 counterclockwise turns from fully closed to fully open, allowing fine-tuning to suit specific needs. Installation requires a valve hex size of 1-1/4 inches (31.8 mm) and torque between 150-160 lbf ft (203-217 Nm). The internal adjustment screw uses a hex size of 5/32 inches (4 mm), while the locknut has a hex size of 9/16 inches (15 mm) and requires torque between 80-90 lbf in (9-10 Nm). Weighing in at 1.30 lb (0.60 kg), this needle valve also supports Viton seal kits for enhanced durability and compatibility with various fluids.
Needle valves with reverse-flow check are fully adjustable orifices used to regulate flow. They are infinitely adjustable from fully closed up to the maximum orifice diameter. An integral high-capacity check valve provides unrestricted flow from port 2 to port 1. They are not pressure compensated.
- All 2-port flow control cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size). However, cartridge extension dimensions from the mounting surface may vary.
- Because needle valves are non-compensating devices, the fixed orifice size will regulate flow through the valve in proportion to the square root of the pressure differential across ports 1 and 2.
- A balanced adjustment mechanism allows for easy adjustment even at high pressures.
- The sharp-edged orifice design minimizes flow variations due to viscosity changes.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 15 gpm (.28 inch)60 L/min. (7,1 mm) |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 drops/min.0,3 cc/min. |
| Adjustment - Number of Counterclockwise Turns - Fully Closed to Fully Open | 55 |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | 1.30 lb0,60 kg |
| Seal kit - Cartridge | Viton: 990-016-006 |
Show FAQ
Additional Resources
- Sun Cartridges with EPDM Seals
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Sun Expands Corrosion-Resistant Solutions
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Manufacturing Sun Cartridge Cavities
- Check, Flow Control, and Priority Flow Control Valves
- Cavity Information (S-171) and Tooling
- Fluid and Temperature Recommendations
- Sun's Floating Style Screw-In Cartridge
- Performance Data
- Sun Model Code Explanation; 999-901-334
- Units of Measure, Settings, and Conversions
- Cartridges: Materials of Construction