You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Sun Hydraulics-QCDACBV-QCDACBV

SUN HYDRAULICS
QCDACBV


$204.52 USD
  • SUN HYDRAULICS
  • Material:QCDACBV
  • Model:QCDA-CBV
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics QCDACBV (QCDACBV) is an accumulator sense, pump unload pilot valve designed to efficiently manage hydraulic systems by sensing pressure in an accumulator at port 2. When the pressure reaches the valve's setting, port 3 connects to port 4 to vent a relief valve and unload the pump. This model features a 15:1 ratio between unload setting and reset, ensuring that when the pressure at port 2 drops below 85% of the valve setting, port 3 is blocked from port 4, allowing the pump to recharge the accumulator. It incorporates an integral free-flow check valve suitable for pump flows up to 15 gpm (60 L/min). The spool design maintains a fixed differential ratio due to its durable construction, minimizing wear over time. The minimum clearances between spool and sleeve and a seal on the pilot piston diameter reduce silting potential significantly. A separate drain line is required during application to prevent erratic operation caused by tank line pressure fluctuations. This cartridge demands careful selection of adjustment range due to system pressure drops and flows affecting unloading valves' operations. The QCDACBV operates within a maximum pressure of 5000 psi (350 bar), with additional specifications including a check cracking pressure of 4 psi (0.3 bar) and a pilot flow capacity of 46 in\u00b3/min (0.75 L/min). Installation requires specific torque settings for both the valve and locknut, ensuring secure placement within hydraulic systems. The model weighs approximately .35 lb (0.15 kg) and uses Viton seal kits for optimal performance in various conditions.

The accumulator sense, pump unload pilot valve is used to sense pressure in an accumulator at port 2 of the valve and when the pressure at port 2 reaches the valve setting, port 3 connects to port 4 to vent a relief valve and unload the pump. This valve has a 15% ratio between unload setting and reset; when pressure at port 2 falls below 85% of the valve setting, port 3 is blocked from port 4 and the pump will come back online to recharge the accumulator. The integral free-flow check valve is suitable for pump flows up to 15 gpm (60 L/min). For higher capacity pumps, another version of accumulator sense, pump unload cartridge, QPAA, which requires a separate check cartridge is available.

  • The pressure differential between unload and reset will be within +/- 1% of the stated ratio of the valve with up to an additional 25 psi (1,7 bar) due to dynamic seal friction.
  • The accumulator sensing area is positively sealed.
  • The spool design of this valve allows it to maintain a fixed differential ratio because the areas are created by diameters on the spool that will not wear or change with use.
  • Minimum clearances between the spool and sleeve and a seal on the pilot piston diameter significantly reduce the potential for silting.
  • When applying this cartridge, a separate drain line is required to prevent erratic operation caused by tank line pressure fluctuations.
  • NOTE: Careful consideration should be given when selecting an adjustment range. System pressure drops and flows tend to affect the operation of unloading valves. Low operating pressures combined with low differentials result in a very narrow band between unload and reset, requiring precise system design. High flow rates typically mean high pressure drops, which subtract from the differential the valve has to work with.
  • Sun has designed a variety of standard accumulator/pump unload assemblies with a variety of features. These assemblies can be found on our website under SOLUTIONS: ACCUMLATOR SENSE, PUMP UNLOAD.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
CavityT-21A
Series1
Capacity15 gpm60 L/min.
Maximum Operating Pressure5000 psi350 bar
Check Cracking Pressure4 psi0,3 bar
Pressure Drop, Port 1 to Port 2100 psi@15 gpm7 bar@60 L/min.
Pilot Flow Capacity46 in³/min.0,75 L/min.
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size7/8 in.22,2 mm
Valve Installation Torque30 - 35 lbf ft41 - 47 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight.35 lb0,15 kg
Seal kit - CartridgeViton: 990-021-006

Show FAQ

Additional Resources