You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RBADCCV


$92.63 USD
  • SUN HYDRAULICS
  • Material:RBADCCV
  • Model:RBAD-CCV
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RBADCCV (RBADCCV) is a direct-acting, pilot relief cartridge designed with back-to-back check valves, enabling it to remotely control two other pilot-operated valves or function as a thermal relief for both ends of an actuator. This valve is specifically suited for load holding applications and offers a solution for preventing overpressure due to thermal fluid expansion. The capacity of this valve is limited to pilot flow, thus it should be used alongside other valves with comparable pilot flows. One of its key features includes the prevention of cross-talk between the two controlled valves through its back-to-back check valve design. The valve's adjustment mechanism allows for the simultaneous control of two valves with a single adjustment point. The RBADCCV model features a check cracking pressure set at 15 psi (1 bar), and any pressure at port 3 directly adds to the valve setting. Its construction incorporates Sun's floating style design, minimizing potential internal binding due to excessive installation torque or machining variations in cavity/cartridge setups. The valve can handle a capacity of 0.25 gpm (1 L/min) and offers a quick response time typically around 2 ms. It exhibits minimal leakage at maximum conditions, rated at five drops per minute (0.3 cc/min). Installation specifications include a valve hex size of 7/8 inch (22.2 mm), an installation torque requirement between 30-35 lbf ft (41-47 Nm), and an adjustment screw internal hex size of 5/32 inch (4 mm). The locknut has a hex size of 9/16 inch (15 mm) with torque requirements ranging from 80-90 lbf in (9-10 Nm). For maintenance or replacement needs, the seal kit cartridge is compatible with Viton: 990011006.

This direct-acting, pilot relief cartridge incorporates back-to-back check valves. This allows it to remotely control 2 other pilot-operated valves or act as a thermal relief for both ends of an actuator. Because capacity is limited to pilot flow, this valve should be used with other valves with comparable pilot flows.

  • The back-to-back check valves prevent cross talk between the two valves that are being remote controlled.
  • One adjustment controls two valves.
  • Check cracking pressure is 15 psi (1 bar).
  • Pressure at port 3 is directly additive to the valve setting.
  • Suitable for load holding applications
  • The term thermal relief means it prevents overpressure due to thermal expansion of the fluid.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-11A
Series1
Capacity.25 gpm1 L/min.
Response Time - Typical2 ms2 ms
Maximum Valve Leakage at 110 SUS (24 cSt)5 drops/min.0,3 cc/min.
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size7/8 in.22,2 mm
Valve Installation Torque30 - 35 lbf ft41 - 47 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Seal kit - CartridgeViton: 990-011-006

Show FAQ

Additional Resources



Notes:
  • For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.