SUN HYDRAULICS
RBATTCN

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RBATTCN (RBATTCN) is a direct-acting, pilot relief cartridge designed to remotely control the pressure setting of other pilot-operated valves. This cartridge is intended for use in applications where capacity is limited to pilot flow and should be paired with higher flow valves. It features a main stage orifice protected by a 150-micron stainless steel screen, making it suitable for load-holding applications. The valve's design incorporates Sun's floating style construction, which minimizes the risk of internal parts binding due to excessive installation torque or machining variations in the cavity/cartridge. The RBATTCN model has a cavity type of T-10A and belongs to Series 1 with a capacity of 0.25 gpm (1 L/min). It can withstand a maximum operating pressure of 5000 psi (350 bar) and has a typical response time of 2 ms. The valve features minimal leakage at maximum conditions, rated at 5 drops/min (0.3 cc/min) at 110 SUS (24 cSt). For adjustments, it requires up to 5.5 clockwise turns to increase the setting, with specific dimensions for installation and adjustment tools: valve hex size is 7/8 inch (22.2 mm), installation torque ranges from 30-35 lbf ft (41-47 Nm), adjustment screw internal hex size is 5/32 inch (4 mm), locknut hex size is 9/16 inch (15 mm), and locknut torque ranges from 80-90 lbf in (9-10 Nm). The model weighs approximately .30 lb (.15 kg) and uses Viton seal kits, specifically part number 990010006.