SUN HYDRAULICS
RPESKQV
$143.60
USD
- SUN HYDRAULICS
- Material:RPESKQV
- Model:RPES-KQV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RPESKQV (RPESKQV) is a pilot-operated, balanced poppet relief cartridge designed for precise pressure regulation. This valve remains normally closed until the inlet port pressure reaches a pre-set threshold, at which point it opens to the tank port, effectively throttling flow to maintain the desired pressure. Its design ensures accuracy and smooth operation while minimizing noise and erosion typically associated with cavitation. The valve can handle maximum pressure at port 2, making it suitable for cross-port relief circuits, and is relatively unaffected by changes in oil temperature or contamination. It features a 150-micron stainless steel screen protecting the main stage orifice and is ideal for load-holding applications. Any back pressure on the tank port directly affects the valve setting in a 1:1 ratio. The RPESKQV model includes options for W and Y controls, allowing adjustments across its full range unless a specific setting is designated as its maximum limit. Constructed with Sun's floating style to prevent internal binding from installation torque or machining variations, this model fits cavity T-10A with a series 1 capacity of 25 gpm (95 L/min). It operates under a maximum pressure of 5000 psi (350 bar) with typical response times around 7 ms and minimal leakage rates at standard conditions. For installation, it requires specific torque settings for both the valve hex size of 7/8 inch (22.2 mm) and locknut hex size of 9/16 inch (15 mm). The model weighs approximately .30 lb (.15 kg) and includes Viton seal kits for optimal performance in demanding applications.
The Sun Hydraulics RPESKQV (RPESKQV) is a pilot-operated, balanced poppet relief cartridge designed for precise pressure regulation. This valve remains normally closed until the inlet port pressure reaches a pre-set threshold, at which point it opens to the tank port, effectively throttling flow to maintain the desired pressure. Its design ensures accuracy and smooth operation while minimizing noise and erosion typically associated with cavitation. The valve can handle maximum pressure at port 2, making it suitable for cross-port relief circuits, and is relatively unaffected by changes in oil temperature or contamination. It features a 150-micron stainless steel screen protecting the main stage orifice and is ideal for load-holding applications. Any back pressure on the tank port directly affects the valve setting in a 1:1 ratio. The RPESKQV model includes options for W and Y controls, allowing adjustments across its full range unless a specific setting is designated as its maximum limit. Constructed with Sun's floating style to prevent internal binding from installation torque or machining variations, this model fits cavity T-10A with a series 1 capacity of 25 gpm (95 L/min). It operates under a maximum pressure of 5000 psi (350 bar) with typical response times around 7 ms and minimal leakage rates at standard conditions. For installation, it requires specific torque settings for both the valve hex size of 7/8 inch (22.2 mm) and locknut hex size of 9/16 inch (15 mm). The model weighs approximately .30 lb (.15 kg) and includes Viton seal kits for optimal performance in demanding applications.
Pilot-operated, balanced-poppet relief cartridges are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. These valves are accurate, smooth, quiet, fast, and have low pressure rise vs. flow.
- Because the modulating occurs inside the cartridge, these valves are immune to most of the problems associated with cavitation, namely noise and manifold erosion.
- Will accept maximum pressure at port 2; suitable for use in cross port relief circuits.
- Valve is relatively insensitive to varying oil temperatures and oil borne contamination.
- Main stage orifice is protected by a 150 micron stainless steel screen.
- Suitable for use in load holding applications.
- Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
- W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-10A |
| Series | 1 |
| Capacity | 25 gpm95 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 7 ms7 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.0,7 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .30 lb0,15 kg |
| Seal kit - Cartridge | Viton: 990-310-006 |
Show FAQ
Additional Resources
- CE/TÜV Certified Pressure Relief Valves
- Pressure Relief and Regulating Cartridge Valve Technical Tips
- Pilot Operated, Balanced Poppet Relief Valves
- Sun Expands Corrosion-Resistant Solutions
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Sun Cartridges with EPDM Seals
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Pilot-Operated, Balanced Poppet, Anti Shock Reliefs
- CavitySaver multi-function valves deliver single-cartridge solutions
- 'Soft' Relief Eliminates Pressure Spikes
- Tri-Grip Handknob Now Offered From Sun as a Standard Control Option
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Sun Introduces 'Hybrid' Valves
- Manufacturing Sun Cartridge Cavities
- Pressure Relief and Regulating Valves
- Sun Model Code Explanation; 999-901-334
- Cartridges: Materials of Construction
- Fluid and Temperature Recommendations
- Performance Data
- Sun's Floating Style Screw-In Cartridge
- Units of Measure, Settings, and Conversions
- Cavity Information (S-171) and Tooling