You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RPGEFWV


$97.99 USD
  • SUN HYDRAULICS
  • Material:RPGEFWV
  • Model:RPGE-FWV
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RPGEFWV (RPGEFWV) is a fast-acting, pilot-operated, balanced piston relief cartridge designed to protect hydraulic components from pressure transients. These normally closed, pressure-limiting valves open rapidly to relieve excess pressure, though this speed comes at the expense of smooth operation. When the inlet port pressure reaches the valve's preset threshold, it begins to open to tank port 2, throttling flow to mitigate further pressure increases. The RPGEFWV is characterized by its low-pressure rise versus flow and rapid response time of approximately 2 milliseconds. This valve can handle a maximum operating pressure of 5000 psi (350 bar) and has a capacity of up to 50 gpm (200 L/min). Physically and functionally interchangeable with other two-port relief cartridges of the same frame size, it fits into a T-3A cavity and incorporates Sun's floating style construction to reduce internal binding risks. It features a main stage orifice protected by a 150-micron stainless steel screen but is unsuitable for load-holding applications due to potential spool leakage. The valve accepts maximum backpressure at port 2, which directly adds to the valve setting at a 1:1 ratio. When configured with EPDM seals, it is compatible with systems using phosphate ester fluids; however, exposure to petroleum-based fluids will damage these seals. The RPGEFWV includes an adjustment mechanism allowing up to five clockwise turns for setting increases and requires specific installation torques: 45-50 lbf ft (61-68 Nm) for the valve itself and 80-90 lbf in (9-10 Nm) for the locknut. This cartridge weighs approximately .50 lb (.25 kg) and comes with Viton seal kits available under part number 990203006.

Fast-acting, pilot-operated, balanced piston relief cartridges are normally closed, pressure-limiting valves used to protect hydraulics components from pressure transients. Fast opening and closing is gained at the expense of smoothness. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to limit the pressure rise. These valves have low pressure rise vs. flow and are very fast.

  • All 2-port relief cartridges (except pilot reliefs) are physically and functionally interchangeable (same flow path, same cavity for a given frame size).
  • Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
  • Main stage orifice is protected by a 150 micron stainless steel screen.
  • Not suitable for use in load holding applications due to spool leakage.
  • Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
  • Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-3A
Series2
Capacity50 gpm200 L/min.
Factory Pressure Settings Established at4 gpm15 L/min.
Maximum Operating Pressure5000 psi350 bar
Response Time - Typical2 ms2 ms
Maximum Valve Leakage at 110 SUS (24 cSt)3 in³/min.@1000 psi50 cc/min.@70 bar
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size1 1/8 in.28,6 mm
Valve Installation Torque45 - 50 lbf ft61 - 68 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight.50 lb0,25 kg
Seal kit - CartridgeViton: 990-203-006

Show FAQ

Additional Resources



Notes:
  • For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.