You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RPGEKCN

$162.27 USD
  • SUN HYDRAULICS
  • Material:RPGEKCN
  • Model:RPGE-KCN
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RPGEKCN (RPGEKCN) is a fast-acting, pilot-operated, balanced piston relief cartridge designed to limit pressure transients in hydraulic systems. This normally closed valve protects hydraulic components by opening quickly when the pressure at the inlet port reaches the preset level, channeling flow to the tank port to manage pressure rise. Known for its low pressure rise versus flow and rapid response time of approximately 2 milliseconds, this valve is ideal for applications requiring quick pressure relief. The RPGEKCN model is interchangeable with other 2-port relief cartridges of the same frame size, offering versatility in cross port relief circuits while considering spool leakage. It features a main stage orifice protected by a 150-micron stainless steel screen and should not be used in load-holding applications due to potential leakage. The valve accommodates back pressure on the tank port at a 1:1 ratio with the valve setting, and it can handle maximum pressures up to 5000 psi (350 bar). The RPGEKCN is equipped with EPDM seals suitable for systems using phosphate ester fluids but incompatible with petroleum-based fluids. Installation requires a torque of 45-50 lbf ft (61-68 Nm), and adjustments can be made via an internal hex screw. This model incorporates Sun's floating style construction to prevent internal binding from excessive torque or machining variations and has a capacity of up to 50 gpm (200 L/min). The cartridge weighs approximately .50 lb (.25 kg) and uses Viton seal kits for maintenance.

Fast-acting, pilot-operated, balanced piston relief cartridges are normally closed, pressure-limiting valves used to protect hydraulics components from pressure transients. Fast opening and closing is gained at the expense of smoothness. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to limit the pressure rise. These valves have low pressure rise vs. flow and are very fast.

  • All 2-port relief cartridges (except pilot reliefs) are physically and functionally interchangeable (same flow path, same cavity for a given frame size).
  • Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
  • Main stage orifice is protected by a 150 micron stainless steel screen.
  • Not suitable for use in load holding applications due to spool leakage.
  • Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
  • Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-3A
Series2
Capacity50 gpm200 L/min.
Factory Pressure Settings Established at4 gpm15 L/min.
Maximum Operating Pressure5000 psi350 bar
Response Time - Typical2 ms2 ms
Maximum Valve Leakage at 110 SUS (24 cSt)3 in³/min.@1000 psi50 cc/min.@70 bar
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size1 1/8 in.28,6 mm
Valve Installation Torque45 - 50 lbf ft61 - 68 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight.50 lb0,25 kg
Seal kit - CartridgeViton: 990-203-006

Show FAQ

Additional Resources



Notes:
  • For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.