SUN HYDRAULICS
RPGEOKV
$117.85 USD
- SUN HYDRAULICS
- Material:RPGEOKV
- Model:RPGE-OKV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RPGEOKV (RPGEOKV) is a fast-acting, pilot-operated, balanced piston relief cartridge designed to protect hydraulic components from pressure transients. This normally closed valve opens rapidly to throttle flow once the inlet port pressure reaches the valve setting, effectively limiting pressure rise. Notable for its low pressure rise versus flow and quick response time of approximately 2 milliseconds, the RPGEOKV is suitable for applications requiring rapid opening and closing actions. It features a main stage orifice protected by a 150-micron stainless steel screen and is not intended for load-holding applications due to spool leakage. The valve can handle a maximum operating pressure of 5000 psi (350 bar) and has a capacity of up to 50 gpm (200 L/min). It is compatible with cross port relief circuits but requires consideration of spool leakage in such setups. The RPGEOKV incorporates Sun's floating style construction to minimize internal part binding from installation torque or machining variations. It can accept maximum pressure at port 2 and has backpressure on the tank port directly additive to the valve setting at a 1:1 ratio. Cartridges configured with EPDM seals are specifically for systems using phosphate ester fluids, as exposure to petroleum-based fluids could damage these seals. For installation, the valve requires a hex size of 1 1/8 inches with an installation torque between 45-50 lbf\u00b7ft (61-68 Nm). The adjustment screw has an internal hex size of 5/32 inches, while the locknut hex size is 9/16 inches with a torque specification of 80-90 lbf\u00b7in (9-10 Nm). The model weighs approximately .50 lb (.25 kg), and it comes with Viton seal kits available under part number 990203006.
The Sun Hydraulics RPGEOKV (RPGEOKV) is a fast-acting, pilot-operated, balanced piston relief cartridge designed to protect hydraulic components from pressure transients. This normally closed valve opens rapidly to throttle flow once the inlet port pressure reaches the valve setting, effectively limiting pressure rise. Notable for its low pressure rise versus flow and quick response time of approximately 2 milliseconds, the RPGEOKV is suitable for applications requiring rapid opening and closing actions. It features a main stage orifice protected by a 150-micron stainless steel screen and is not intended for load-holding applications due to spool leakage. The valve can handle a maximum operating pressure of 5000 psi (350 bar) and has a capacity of up to 50 gpm (200 L/min). It is compatible with cross port relief circuits but requires consideration of spool leakage in such setups. The RPGEOKV incorporates Sun's floating style construction to minimize internal part binding from installation torque or machining variations. It can accept maximum pressure at port 2 and has backpressure on the tank port directly additive to the valve setting at a 1:1 ratio. Cartridges configured with EPDM seals are specifically for systems using phosphate ester fluids, as exposure to petroleum-based fluids could damage these seals. For installation, the valve requires a hex size of 1 1/8 inches with an installation torque between 45-50 lbf\u00b7ft (61-68 Nm). The adjustment screw has an internal hex size of 5/32 inches, while the locknut hex size is 9/16 inches with a torque specification of 80-90 lbf\u00b7in (9-10 Nm). The model weighs approximately .50 lb (.25 kg), and it comes with Viton seal kits available under part number 990203006.
Fast-acting, pilot-operated, balanced piston relief cartridges are normally closed, pressure-limiting valves used to protect hydraulics components from pressure transients. Fast opening and closing is gained at the expense of smoothness. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to limit the pressure rise. These valves have low pressure rise vs. flow and are very fast.
- All 2-port relief cartridges (except pilot reliefs) are physically and functionally interchangeable (same flow path, same cavity for a given frame size).
- Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
- Main stage orifice is protected by a 150 micron stainless steel screen.
- Not suitable for use in load holding applications due to spool leakage.
- Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-3A |
| Series | 2 |
| Capacity | 50 gpm200 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 2 ms2 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 3 in³/min.@1000 psi50 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .50 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-203-006 |
Show FAQ
Additional Resources
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Sun Cartridges with EPDM Seals
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Pilot-Operated, Balanced Poppet, Anti Shock Reliefs
- CavitySaver multi-function valves deliver single-cartridge solutions
- 'Soft' Relief Eliminates Pressure Spikes
- Tri-Grip Handknob Now Offered From Sun as a Standard Control Option
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Sun Introduces 'Hybrid' Valves
- CE/TÜV Certified Pressure Relief Valves
- Pressure Relief and Regulating Cartridge Valve Technical Tips
- Pilot Operated, Balanced Poppet Relief Valves
- Sun Expands Corrosion-Resistant Solutions
- Manufacturing Sun Cartridge Cavities
- Pressure Relief and Regulating Valves
- Sun Model Code Explanation; 999-901-334
- Cartridges: Materials of Construction
- Fluid and Temperature Recommendations
- Performance Data
- Sun's Floating Style Screw-In Cartridge
- Units of Measure, Settings, and Conversions
- Cavity Information (S-171) and Tooling
Notes:
- For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.