You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RPGEONV


$117.85 USD
  • SUN HYDRAULICS
  • Material:RPGEONV
  • Model:RPGE-ONV
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RPGEONV (Material Number: RPGEONV) is a fast-acting, pilot-operated, balanced piston relief cartridge designed to protect hydraulic components from pressure transients. These normally closed valves limit pressure by opening to a tank port when inlet pressure reaches the valve setting. The RPGEONV offers rapid response with low pressure rise vs. flow, making it particularly suitable for applications requiring quick pressure relief. This model can handle a maximum operating pressure of 5000 psi (350 bar) and has a flow capacity of 50 gpm (200 L/min). It features a main stage orifice protected by a 150-micron stainless steel screen but is not recommended for load-holding applications due to spool leakage. The valve is interchangeable with other 2-port relief cartridges of the same frame size and flow path, allowing for versatile use in various systems. It can accept maximum pressure at port 2 and is suitable for cross-port relief circuits, though spool leakage should be considered in such applications. The backpressure on the tank port directly adds to the valve setting at a 1:1 ratio. For systems using phosphate ester fluids, cartridges configured with EPDM seals are available; however, these seals should not be exposed to petroleum-based fluids as they will incur damage. The Sun Hydraulics floating style construction minimizes internal part binding due to excessive installation torque or machining variations. The RPGEONV includes adjustment features such as an internal hex screw and locknut for fine-tuning the valve settings and requires specific installation torque values for optimal performance. With its robust design and quick response time of approximately 2 milliseconds, this relief cartridge is an essential component in maintaining system integrity under variable hydraulic conditions.

Fast-acting, pilot-operated, balanced piston relief cartridges are normally closed, pressure-limiting valves used to protect hydraulics components from pressure transients. Fast opening and closing is gained at the expense of smoothness. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to limit the pressure rise. These valves have low pressure rise vs. flow and are very fast.

  • All 2-port relief cartridges (except pilot reliefs) are physically and functionally interchangeable (same flow path, same cavity for a given frame size).
  • Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
  • Main stage orifice is protected by a 150 micron stainless steel screen.
  • Not suitable for use in load holding applications due to spool leakage.
  • Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
  • Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-3A
Series2
Capacity50 gpm200 L/min.
Factory Pressure Settings Established at4 gpm15 L/min.
Maximum Operating Pressure5000 psi350 bar
Response Time - Typical2 ms2 ms
Maximum Valve Leakage at 110 SUS (24 cSt)3 in³/min.@1000 psi50 cc/min.@70 bar
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size1 1/8 in.28,6 mm
Valve Installation Torque45 - 50 lbf ft61 - 68 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight.50 lb0,25 kg
Seal kit - CartridgeViton: 990-203-006

Show FAQ

Additional Resources



Notes:
  • For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.