You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RPITLWV

$527.47 USD
  • SUN HYDRAULICS
  • Material:RPITLWV
  • Model:RPIT-LWV
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RPITLWV (RPITLWV) is a pilot-operated, anti-shock relief cartridge designed to limit maximum system pressure and control the rate of pressure rise. This valve opens and ramps closed at a constant speed regardless of settings and flows, with an adjust screw to determine both the maximum relief setting and minimum threshold setting. It is suitable for use in cross-port relief circuits but not recommended for load-holding applications. When inlet port 1 pressure surpasses the threshold setting, the valve opens to tank port 2, with the pilot section moving forward at a steady rate to increase the setting by compressing the pilot spring until a mechanical stop is reached. This valve offers protection for pumps and motors from pressure transients due to sudden load changes, particularly in variable displacement pumps where displacement mechanisms may be too slow to respond. It also helps protect hydrostatic drives by reducing jerks from sudden reversals and can provide ramp characteristics when used with switching devices, similar to proportional valves. Small power units can benefit from this valve by starting against an anti-shock relief for longer pump life. The back pressure on tank port 2 adds directly to the valve setting at a 1:1 ratio. The RPITLWV incorporates Sun's floating style construction to minimize internal part binding due to excessive installation torque or cavity/cartridge machining variations. It features a T-16A cavity, Series 3 capacity of 100 gpm (380 L/min), maximum operating pressure of 5000 psi (350 bar), and control pilot flow between 10 - 25 in\u00b3/min (0.16 - 0.41 L/min). The typical response time is approximately 2 ms, with a pressure ramp-up time between 300 - 500 ms.

Pilot-operated, anti shock relief cartridges limit maximum system pressure and also limit the rate of pressure rise. The valve opens and then ramps closed at a constant speed, independent of settings and flows. The adjust screw determines the maximum (relief) setting and the minimum (threshold) setting.

  • All 2-port relief cartridges (except pilot reliefs) are physically and functionally interchangeable (same flow path, same cavity for a given frame size).
  • Will accept maximum pressure at port 2; suitable for use in cross port relief circuits.
  • Not suitable for use in load holding applications.
  • When pressure at the inlet (port 1) exceeds the threshold setting, the valve opens to tank (port 2). The pilot section moves forward at a steady rate, increasing the setting by compressing the pilot spring. Maximum setting is achieved when the pilot section reaches a mechanical stop.
  • Valve provides protection for pumps and motors from pressure transients due to sudden load changes, especially variable displacement pumps, since the displacement mechanism is sometimes too slow to catch these pressure transients.
  • Valve provides protection for hydrostatic drives by reducing the jerk caused by sudden reversals. The valve is suitable for cross-port applications.
  • When used with a switching device, the valve can provide the ramp characteristic typically provided by proportional valves.
  • Small power units can be started against an anti shock relief to provide longer pump life.
  • Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-16A
Series3
Capacity100 gpm380 L/min.
Factory Pressure Settings Established at4 gpm15 L/min.
Maximum Operating Pressure5000 psi350 bar
Control Pilot Flow10 - 25 in³/min.0,16 - 0,41 L/min.
Response Time - Typical2 ms2 ms
U.S. Patent #6,039,0706,039,070
Pressure Ramp Up Time300 - 500 ms300 - 500 ms
Adjustment - Number of Clockwise Turns to Increase Setting4.54.5
Valve Hex Size1 1/4 in.31,8 mm
Valve Installation Torque150 - 160 lbf ft203 - 217 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight1.00 lb0,45 kg
Seal kit - CartridgeViton: 990-316-006

Show FAQ

Additional Resources



Notes:
  • Patents: US#6,039,070; Germany EP 1 001 197; Japan #3,119,230
  • Patents: US#6,039,070; Germany EP 1 001 197; Japan #3,119,230