SUN HYDRAULICS
RPKCCWV
$396.72 USD
- SUN HYDRAULICS
- Material:RPKCCWV
- Model:RPKC-CWV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RPKCCWV (RPKCCWV) is a pilot-operated, balanced-piston relief cartridge valve designed for precise pressure regulation in hydraulic systems. This valve remains normally closed until the inlet port pressure reaches the pre-set level, at which point it begins to open to the tank port, thereby throttling flow to maintain desired pressure levels. Notable for its accuracy and low-pressure rise versus flow characteristics, this valve operates smoothly and quietly with moderate speed. It can handle maximum pressure at port 2, making it suitable for cross port relief circuits; however, spool leakage should be considered in such applications. The main stage orifice features a 150-micron stainless steel screen for protection. The valve is not recommended for load-holding applications due to potential spool leakage. Any back pressure on tank port 2 will directly add to the valve setting in a 1:1 ratio. All two-port relief cartridges are interchangeable within the same frame size regarding flow path and cavity compatibility. This model can be configured with EPDM seals, ideal for systems using phosphate ester fluids but unsuitable for petroleum-based fluids or greases due to potential seal damage. W and Y control options allow full-range adjustment unless a special setting is specified as the maximum limit. Corrosion-resistant versions are available with stainless steel or zinc-nickel plating identified by suffixes AP or LH respectively. The RPKCCWV incorporates Sun's floating style construction to minimize internal binding issues from excessive torque or machining variations during installation. With a capacity of 200 gpm (760 L/min) and a maximum operating pressure of 5000 psi (350 bar), this valve responds typically within 10 ms and has minimal leakage rates under specified conditions. It is equipped with Viton seals as standard, ensuring durability in diverse environments.
The Sun Hydraulics RPKCCWV (RPKCCWV) is a pilot-operated, balanced-piston relief cartridge valve designed for precise pressure regulation in hydraulic systems. This valve remains normally closed until the inlet port pressure reaches the pre-set level, at which point it begins to open to the tank port, thereby throttling flow to maintain desired pressure levels. Notable for its accuracy and low-pressure rise versus flow characteristics, this valve operates smoothly and quietly with moderate speed. It can handle maximum pressure at port 2, making it suitable for cross port relief circuits; however, spool leakage should be considered in such applications. The main stage orifice features a 150-micron stainless steel screen for protection. The valve is not recommended for load-holding applications due to potential spool leakage. Any back pressure on tank port 2 will directly add to the valve setting in a 1:1 ratio. All two-port relief cartridges are interchangeable within the same frame size regarding flow path and cavity compatibility. This model can be configured with EPDM seals, ideal for systems using phosphate ester fluids but unsuitable for petroleum-based fluids or greases due to potential seal damage. W and Y control options allow full-range adjustment unless a special setting is specified as the maximum limit. Corrosion-resistant versions are available with stainless steel or zinc-nickel plating identified by suffixes AP or LH respectively. The RPKCCWV incorporates Sun's floating style construction to minimize internal binding issues from excessive torque or machining variations during installation. With a capacity of 200 gpm (760 L/min) and a maximum operating pressure of 5000 psi (350 bar), this valve responds typically within 10 ms and has minimal leakage rates under specified conditions. It is equipped with Viton seals as standard, ensuring durability in diverse environments.
Pilot-operated, balanced-piston relief cartridges are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. These valves are accurate, have low pressure rise vs. flow, they are smooth and quiet, and are moderately fast.
- Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
- Main stage orifice is protected by a 150 micron stainless steel screen.
- Not suitable for use in load holding applications due to spool leakage.
- Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
- All 2-port relief cartridges (except pilot reliefs) are physically and functionally interchangeable (same flow path, same cavity for a given frame size).
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-18A |
| Series | 4 |
| Capacity | 200 gpm760 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 10 ms10 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@1000 psi80 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 5/8 in.41,3 mm |
| Valve Installation Torque | 350 - 375 lbf ft474 - 508 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | 2.50 lb1,15 kg |
| Seal kit - Cartridge | Viton: 990-018-006 |
Show FAQ
Additional Resources
- Tri-Grip Handknob Now Offered From Sun as a Standard Control Option
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Sun Introduces 'Hybrid' Valves
- CE/TÜV Certified Pressure Relief Valves
- Pressure Relief and Regulating Cartridge Valve Technical Tips
- Pilot Operated, Balanced Poppet Relief Valves
- Sun Expands Corrosion-Resistant Solutions
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Sun Cartridges with EPDM Seals
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Pilot-Operated, Balanced Poppet, Anti Shock Reliefs
- CavitySaver multi-function valves deliver single-cartridge solutions
- 'Soft' Relief Eliminates Pressure Spikes
- Manufacturing Sun Cartridge Cavities
- Pressure Relief and Regulating Valves
- Sun's Floating Style Screw-In Cartridge
- Units of Measure, Settings, and Conversions
- Cavity Information (S-171) and Tooling
- Sun Model Code Explanation; 999-901-334
- Cartridges: Materials of Construction
- Fluid and Temperature Recommendations
- Performance Data