SUN HYDRAULICS
RPKCKEV

$404.67 USD

SUN HYDRAULICS
Material:RPKCKEV
Model:RPKC-KEV
Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RPKCKEV (RPKCKEV) is a pilot-operated, balanced-piston relief cartridge designed to regulate pressure in hydraulic systems. This valve remains normally closed until the pressure at inlet port 1 reaches the set threshold, at which point it opens to tank port 2, allowing flow to manage the system pressure. Known for its precision and smooth operation, it offers low-pressure rise against flow and operates quietly with moderate speed. It is suitable for cross-port relief circuits but should be used with caution due to potential spool leakage. The main stage orifice is safeguarded by a 150-micron stainless steel screen, making it robust for various applications. Notably, this valve is not recommended for load-holding applications due to potential leakage issues. Any back pressure on tank port 2 directly affects the valve setting in a 1:1 ratio. The RPKCKEV model features interchangeable cartridges across similar frame sizes and flow paths, enhancing versatility. For systems using phosphate ester fluids, EPDM seals are available; however, these seals are incompatible with petroleum-based substances. The valve incorporates Sun's floating style construction to prevent internal binding from excessive installation torque or machining variations. With a cavity size of T-18A and a series capacity of 200 gpm (760 L/min), it can handle pressures up to 5000 psi (350 bar). The response time is typically around 10 ms, with maximum valve leakage rated at 5 in\u00b3/min (80 cc/min) under specified conditions. Additional features include adjustable settings through W or Y controls and corrosion-resistant options identified by suffixes AP or LH for stainless steel or zinc-nickel plated components respectively. The RPKCKEV model weighs approximately 2.50 lb (1.15 kg) and requires specific installation torque values for optimal performance.

Description

Pilot-operated, balanced-piston relief cartridges are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. These valves are accurate, have low pressure rise vs. flow, they are smooth and quiet, and are moderately fast.

Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
Main stage orifice is protected by a 150 micron stainless steel screen.
Not suitable for use in load holding applications due to spool leakage.
Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
All 2-port relief cartridges (except pilot reliefs) are physically and functionally interchangeable (same flow path, same cavity for a given frame size).
Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Cavity	T-18A
Series	4
Capacity	200 gpm760 L/min.
Factory Pressure Settings Established at	4 gpm15 L/min.
Maximum Operating Pressure	5000 psi350 bar
Response Time - Typical	10 ms10 ms
Maximum Valve Leakage at 110 SUS (24 cSt)	5 in³/min.@1000 psi80 cc/min.@70 bar
Adjustment - Number of Clockwise Turns to Increase Setting	55
Valve Hex Size	1 5/8 in.41,3 mm
Valve Installation Torque	350 - 375 lbf ft474 - 508 Nm
Adjustment Screw Internal Hex Size	5/32 in.4 mm
Locknut Hex Size	9/16 in.15 mm
Locknut Torque	80 - 90 lbf in.9 - 10 Nm
Model Weight	2.50 lb1,15 kg
Seal kit - Cartridge	Viton: 990-018-006

Show FAQ

Where would I use a kick-down relief?	One graphic example is on a portable grain auger for silos. When the farmer gets caught in the auger the kick-down relief trips and allows him to escape.
What are the tolerances on pressure settings for Sun's pressure control valves?	Pressure setting tolerances are listed in our Performance Data page. A link to this page can also be found in the Additional Resources tab of the applicable product page.
How big is a drop of hydraulic oil?	There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Can I use a kick-down relief for my system relief?	Maybe not. We build in a good amount of overlap in the kick-down reliefs to prevent false tripping. This means they are not as fast as our standard pilot-operated reliefs. A direct-acting relief valve set just above the kick-down relief valve would be good insurance.
Direct acting or pilot operated - what do I use?	Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

SUN HYDRAULICSRPKCKEV

Additional Resources

SUN HYDRAULICS
RPKCKEV