You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RPKSCNN


$438.52 USD
  • SUN HYDRAULICS
  • Material:RPKSCNN
  • Model:RPKS-CNN
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RPKSCNN (RPKSCNN) is a pilot-operated, balanced poppet relief cartridge valve designed for precise pressure regulation in hydraulic systems. This normally closed valve opens to the tank port when the inlet pressure reaches the set point, effectively throttling flow to maintain desired pressure levels. Known for its accuracy, smooth operation, and low noise, it is immune to cavitation issues such as noise and manifold erosion. The valve can handle maximum pressure at port 2 and is suitable for cross port relief circuits. It remains stable despite variations in oil temperature and contamination due to its protected main stage orifice with a 150-micron stainless steel screen. Back pressure on the tank port directly adds to the valve setting at a 1:1 ratio. The RPKSCNN model features corrosion-resistant options with external stainless steel or zinc-nickel plated components and incorporates floating style construction to prevent internal binding from installation torque or machining variations. With a capacity of 200 gpm (760 L/min) and a maximum operating pressure of 5000 psi (350 bar), it offers rapid response times of approximately 7 ms and minimal leakage upon reseat. The valve's design allows for adjustment throughout its range using W or Y controls, with special settings available upon request. Installation requires specific torque settings, with detailed specifications provided for hex sizes and locknut torque. This cartridge valve is ideal for applications requiring reliable kickdown relief, such as portable grain augers where quick response is critical. However, it may not be suitable as a system relief due to its overlap design intended to prevent false tripping. For optimal performance in overpressure prevention or regulation tasks, Sun's direct-acting valves are recommended alongside this pilot-operated model.

Pilot-operated, balanced-poppet relief cartridges are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. These valves are accurate, smooth, quiet, fast, and have low pressure rise vs. flow.

  • Because the modulating occurs inside the cartridge, these valves are immune to most of the problems associated with cavitation, namely noise and manifold erosion.
  • Will accept maximum pressure at port 2; suitable for use in cross port relief circuits.
  • Valve is relatively insensitive to varying oil temperatures and oil borne contamination.
  • Main stage orifice is protected by a 150 micron stainless steel screen.
  • Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
  • W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
  • Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-18A
Series4
Capacity200 gpm760 L/min.
Factory Pressure Settings Established at4 gpm15 L/min.
Maximum Operating Pressure5000 psi350 bar
Response Time - Typical7 ms7 ms
Maximum Valve Leakage at Reseat10 drops/min.0,7 cc/min.
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size1 5/8 in.41,3 mm
Valve Installation Torque350 - 375 lbf ft474 - 508 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight2.50 lb1,15 kg
Seal kit - CartridgeViton: 990-318-006

Show FAQ

Additional Resources