You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RPKSKWV

$659.90 USD
  • SUN HYDRAULICS
  • Material:RPKSKWV
  • Model:RPKS-KWV
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RPKSKWV (RPKSKWV) is a pilot-operated, balanced poppet relief cartridge designed as a normally closed pressure regulating valve. It operates by opening to the tank port when the inlet port pressure reaches the valve's set point, effectively throttling flow to regulate pressure. This valve is known for its accuracy, smooth operation, quiet performance, fast response time of approximately 7 ms, and low-pressure rise relative to flow. A notable feature is its immunity to cavitation-related issues such as noise and manifold erosion due to modulation occurring within the cartridge itself. The valve can handle maximum pressure at port 2 and is suitable for use in cross-port relief circuits. It demonstrates insensitivity to variations in oil temperature and contamination, with a main stage orifice protected by a 150-micron stainless steel screen. The back pressure on tank port 2 adds directly to the valve setting at a 1:1 ratio. For flexibility, W and Y controls allow adjustment throughout the full range unless specified with a special setting that denotes the maximum setting. Designed for corrosive environments, it can be configured with external stainless steel or zinc-nickel plated components identified by model code suffixes AP or LH respectively. The construction minimizes internal binding due to excessive installation torque or machining variations in cavity/cartridge setups. With a capacity of up to 200 gpm (760 L/min) and maximum operating pressure of 5000 psi (350 bar), this versatile component weighs approximately 2.50 lb (1.15 kg). It comes equipped with Viton seal kits and offers various adjustment options through its robust design elements including hex size specifications for installation torque adjustments.

Pilot-operated, balanced-poppet relief cartridges are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. These valves are accurate, smooth, quiet, fast, and have low pressure rise vs. flow.

  • Because the modulating occurs inside the cartridge, these valves are immune to most of the problems associated with cavitation, namely noise and manifold erosion.
  • Will accept maximum pressure at port 2; suitable for use in cross port relief circuits.
  • Valve is relatively insensitive to varying oil temperatures and oil borne contamination.
  • Main stage orifice is protected by a 150 micron stainless steel screen.
  • Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
  • W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
  • Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-18A
Series4
Capacity200 gpm760 L/min.
Factory Pressure Settings Established at4 gpm15 L/min.
Maximum Operating Pressure5000 psi350 bar
Response Time - Typical7 ms7 ms
Maximum Valve Leakage at Reseat10 drops/min.0,7 cc/min.
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size1 5/8 in.41,3 mm
Valve Installation Torque350 - 375 lbf ft474 - 508 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight2.50 lb1,15 kg
Seal kit - CartridgeViton: 990-318-006

Show FAQ

Additional Resources