You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RQCBLAV


$80.32 USD
  • SUN HYDRAULICS
  • Material:RQCBLAV
  • Model:RQCB-LAV
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RQCBLAV (Material Number: RQCBLAV) is a kickdown relief cartridge designed to function similarly to a circuit breaker within hydraulic systems. This valve automatically opens and remains open once the pressure at inlet port 1 surpasses the set threshold, providing an unrestricted flow path to tank port 2. It stays open as long as the pressure at port 1 is higher than at port 2. To reset, flow from port 1 to port 2 must stop, and the pressure at port 2 must equal or exceed that at port 1. The valve features a main stage orifice shielded by a 150-micron stainless steel screen, ensuring durability and reliability in various applications. However, it is not suitable for load-holding applications and should be used on the actuator side of a system since flow cessation through the valve is necessary for resetting. This model supports a maximum operating pressure of 5000 psi (350 bar) with a capacity of up to 12 gpm (45 L/min). It incorporates Sun's floating style construction, which minimizes internal part binding due to excessive installation torque or machining variations. The valve exhibits a typical response time of approximately 25 milliseconds and maintains minimal leakage rates under specified conditions. Adjustments can be made via an internal hex adjustment screw with detailed specifications for torque settings provided for various components. The RQCBLAV is particularly applicable in scenarios where immediate pressure release is crucial, such as in agricultural equipment like portable grain augers. Its design allows it to act swiftly in emergency situations, providing safety mechanisms that prevent equipment damage or personal injury by releasing excess pressure effectively.

Kick-down relief cartridges act similar to a circuit breaker in an electrical system. The valves will kick completely open and remain open once the pressure at the inlet (port 1) exceeds the valve settting, creating an unrestricted flow path from port 1 to tank (port 2). The valve remains open as long as the pressure at port 1 exceeds the pressure at port 2. To reset the valve, flow from port 1 to port 2 must cease and pressure at port 2 must be equal to or greater than the pressure at port 1.

  • To reset valve, flow through the cartridge must cease.
  • Main stage orifice is protected by a 150 micron stainless steel screen.
  • Not suitable for use in load holding applications.
  • Intended for use on the actuator side of the system as flow through the valve must cease for the valve to reset. If used on the pump side of a system, pump flow must be shut off for the valve to reset.
  • Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
  • All 2-port relief cartridges (except pilot reliefs) are physically and functionally interchangeable (same flow path, same cavity for a given frame size).
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-162A
Series0
Capacity12 gpm45 L/min.
Factory Pressure Settings Established atKick down pointKick down point
Maximum Operating Pressure5000 psi350 bar
Response Time - Typical25 ms25 ms
Maximum Valve Leakage at 110 SUS (24 cSt)2 in³/min.@1000 psi30 cc/min.@70 bar
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size3/4 in.19,1 mm
Valve Installation Torque20 - 25 lbf ft27 - 33 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight.20 lb0,10 kg
Seal kit - CartridgeViton: 990-162-006

Show FAQ

Additional Resources



Notes:
  • Do not use in load holding applications.