SUN HYDRAULICS
RQEBJDN
$73.86 USD
- SUN HYDRAULICS
- Material:RQEBJDN
- Model:RQEB-JDN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RQEBJDN (RQEBJDN) is a versatile kickdown relief cartridge designed to function similarly to a circuit breaker in hydraulic systems. When the pressure at inlet port 1 surpasses the valve setting, the valve opens completely, allowing unrestricted flow from port 1 to tank port 2. This state remains as long as the pressure at port 1 exceeds that at port 2. To reset, flow from port 1 to port 2 must stop, and the pressure at port 2 must equal or exceed that at port 1. The main stage orifice is safeguarded by a 150-micron stainless steel screen, enhancing its durability. Not suitable for load-holding applications, this valve is intended for use on the actuator side of systems, ensuring that flow through it ceases for resetting. If used on the pump side, pump flow must be halted for reset. The valve's design includes corrosion-resistant features with options for external stainless steel or zinc-nickel plated components, identified by model code suffixes AP or LH respectively. It utilizes Sun's floating style construction to reduce internal binding risks due to excessive installation torque or machining variations. With a capacity of up to 25 gpm (95 L/min) and a maximum operating pressure of 5000 psi (350 bar), it offers reliable performance with typical response times around 25 ms and minimal leakage rates under specified conditions. This product also incorporates user-friendly adjustments with specific hex sizes and torque requirements for installation and adjustment screws. Weighing approximately .30 lb (.15 kg), it comes with a Viton seal kit option (990010006). This kickdown relief cartridge finds applications in scenarios such as portable grain augers for safety release mechanisms and should be paired with direct-acting valves when rapid response is crucial in system relief settings.
The Sun Hydraulics RQEBJDN (RQEBJDN) is a versatile kickdown relief cartridge designed to function similarly to a circuit breaker in hydraulic systems. When the pressure at inlet port 1 surpasses the valve setting, the valve opens completely, allowing unrestricted flow from port 1 to tank port 2. This state remains as long as the pressure at port 1 exceeds that at port 2. To reset, flow from port 1 to port 2 must stop, and the pressure at port 2 must equal or exceed that at port 1. The main stage orifice is safeguarded by a 150-micron stainless steel screen, enhancing its durability. Not suitable for load-holding applications, this valve is intended for use on the actuator side of systems, ensuring that flow through it ceases for resetting. If used on the pump side, pump flow must be halted for reset. The valve's design includes corrosion-resistant features with options for external stainless steel or zinc-nickel plated components, identified by model code suffixes AP or LH respectively. It utilizes Sun's floating style construction to reduce internal binding risks due to excessive installation torque or machining variations. With a capacity of up to 25 gpm (95 L/min) and a maximum operating pressure of 5000 psi (350 bar), it offers reliable performance with typical response times around 25 ms and minimal leakage rates under specified conditions. This product also incorporates user-friendly adjustments with specific hex sizes and torque requirements for installation and adjustment screws. Weighing approximately .30 lb (.15 kg), it comes with a Viton seal kit option (990010006). This kickdown relief cartridge finds applications in scenarios such as portable grain augers for safety release mechanisms and should be paired with direct-acting valves when rapid response is crucial in system relief settings.
Kick-down relief cartridges act similar to a circuit breaker in an electrical system. The valves will kick completely open and remain open once the pressure at the inlet (port 1) exceeds the valve settting, creating an unrestricted flow path from port 1 to tank (port 2). The valve remains open as long as the pressure at port 1 exceeds the pressure at port 2. To reset the valve, flow from port 1 to port 2 must cease and pressure at port 2 must be equal to or greater than the pressure at port 1.
- To reset valve, flow through the cartridge must cease.
- Main stage orifice is protected by a 150 micron stainless steel screen.
- Not suitable for use in load holding applications.
- Intended for use on the actuator side of the system as flow through the valve must cease for the valve to reset. If used on the pump side of a system, pump flow must be shut off for the valve to reset.
- Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
- All 2-port relief cartridges (except pilot reliefs) are physically and functionally interchangeable (same flow path, same cavity for a given frame size).
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-10A |
| Series | 1 |
| Capacity | 25 gpm95 L/min. |
| Factory Pressure Settings Established at | Kick down pointKick down point |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 25 ms25 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 2 in³/min.@1000 psi30 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .30 lb0,15 kg |
| Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ
Additional Resources
- Tri-Grip Handknob Now Offered From Sun as a Standard Control Option
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Sun Introduces 'Hybrid' Valves
- CE/TÜV Certified Pressure Relief Valves
- Pressure Relief and Regulating Cartridge Valve Technical Tips
- Pilot Operated, Balanced Poppet Relief Valves
- Sun Expands Corrosion-Resistant Solutions
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Sun Cartridges with EPDM Seals
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Pilot-Operated, Balanced Poppet, Anti Shock Reliefs
- CavitySaver multi-function valves deliver single-cartridge solutions
- 'Soft' Relief Eliminates Pressure Spikes
- Manufacturing Sun Cartridge Cavities
- Pressure Relief and Regulating Valves
- Cavity Information (S-171) and Tooling
- Sun Model Code Explanation; 999-901-334
- Cartridges: Materials of Construction
- Fluid and Temperature Recommendations
- Performance Data
- Sun's Floating Style Screw-In Cartridge
- Units of Measure, Settings, and Conversions
Notes:
- Do not use in load holding applications.
- For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.