SUN HYDRAULICS
RSFCOBV
$128.57 USD
- SUN HYDRAULICS
- Material:RSFCOBV
- Model:RSFC-OBV
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RSFCOBV (RSFCOBV) is a pilot-operated, balanced piston sequence valve designed to supply a secondary circuit with flow once the pressure at the inlet port 1 exceeds the valve setting. This valve's pressure setting controls the pressure at port 1 relative to the drain port 3, remaining insensitive to back pressure at port 2 up to the valve setting. It is suitable for regulating pressure in place of two-port relief valves if there is pressure in the return line. The RSFCOBV features interchangeable functionality and physical compatibility with all three-port sequence cartridges of the same frame size, ensuring consistent flow paths and cavity configurations. The valve incorporates a main stage orifice protected by a 150-micron stainless steel screen and can handle pressures at port 3 that are directly additive to the valve setting at a 1:1 ratio, not exceeding 5000 psi (350 bar). However, it is not recommended for load-holding applications due to spool leakage. The RSFCOBV allows for adjustable settings using W or Y controls, with or without special settings specified. Cartridges with EPDM seals are designed for systems using phosphate ester fluids as exposure to petroleum-based substances can damage these seals. This model uses Sun's floating style construction to minimize internal part binding due to excessive installation torque or machining variations. It has a maximum operating pressure of 5000 psi (350 bar) and supports a capacity of up to 30 gpm (120 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with control pilot flows ranging from 10-15 in\u00b3/min (0.16-0.25 L/min) and typical response times around 10 ms. The maximum valve leakage is rated at three in\u00b3/min at 110 SUS (24 cSt) under a condition of 1000 psi (70 bar).
The Sun Hydraulics RSFCOBV (RSFCOBV) is a pilot-operated, balanced piston sequence valve designed to supply a secondary circuit with flow once the pressure at the inlet port 1 exceeds the valve setting. This valve's pressure setting controls the pressure at port 1 relative to the drain port 3, remaining insensitive to back pressure at port 2 up to the valve setting. It is suitable for regulating pressure in place of two-port relief valves if there is pressure in the return line. The RSFCOBV features interchangeable functionality and physical compatibility with all three-port sequence cartridges of the same frame size, ensuring consistent flow paths and cavity configurations. The valve incorporates a main stage orifice protected by a 150-micron stainless steel screen and can handle pressures at port 3 that are directly additive to the valve setting at a 1:1 ratio, not exceeding 5000 psi (350 bar). However, it is not recommended for load-holding applications due to spool leakage. The RSFCOBV allows for adjustable settings using W or Y controls, with or without special settings specified. Cartridges with EPDM seals are designed for systems using phosphate ester fluids as exposure to petroleum-based substances can damage these seals. This model uses Sun's floating style construction to minimize internal part binding due to excessive installation torque or machining variations. It has a maximum operating pressure of 5000 psi (350 bar) and supports a capacity of up to 30 gpm (120 L/min). Factory pressure settings are established at 4 gpm (15 L/min), with control pilot flows ranging from 10-15 in\u00b3/min (0.16-0.25 L/min) and typical response times around 10 ms. The maximum valve leakage is rated at three in\u00b3/min at 110 SUS (24 cSt) under a condition of 1000 psi (70 bar).
Pilot-operated, balanced piston sequence valves will supply a secondary circuit with flow once the pressure at the inlet (port 1) has exceeded the valve setting. The pressure setting of a sequence valve controls the pressure at port 1 relative to the pressure at the drain (port 3). These valves are insensitive to back pressure at port 2 (sequence), up to the valve setting. They may be used to regulate pressure in place of 2-port relief valves if there is pressure in the return line.
- All 3 port sequence cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size).
- Pilot flow continues to increase as the pressure at port 1 (inlet), relative to the pressure at port 3 (drain), rises above the valve setting.
- The main stage orifice is protected by a 150 micron stainless steel screen.
- Pressure at port 3 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
- Not suitable for use in load holding applications due to spool leakage.
- W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 30 gpm120 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Response Time - Typical | 10 ms10 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 3 in³/min.@1000 psi50 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .50 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ
Additional Resources
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Sun Cartridges with EPDM Seals
- Sun Expands Corrosion-Resistant Solutions
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Sequence Valves Technical Tips
- Manufacturing Sun Cartridge Cavities
- Sequence Valves
- Sun Model Code Explanation; 999-901-334
- Cavity Information (S-171) and Tooling
- Cartridges: Materials of Construction
- Fluid and Temperature Recommendations
- Performance Data
- Sun's Floating Style Screw-In Cartridge
- Units of Measure, Settings, and Conversions
Notes:
- For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.