SUN HYDRAULICS
RSFCODN
$122.61 USD
- SUN HYDRAULICS
- Material:RSFCODN
- Model:RSFC-ODN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RSFCODN (RSFCODN) is a pilot-operated, balanced piston sequence valve designed to supply a secondary circuit with flow once the inlet port 1 pressure surpasses the valve setting. It effectively controls pressure at port 1 relative to the drain port 3, remaining unaffected by back pressure at port 2 up to the valve setting. This makes it suitable for regulating pressure in scenarios where there is pressure in the return line, serving as an alternative to two-port relief valves. The RSFCODN is part of a range where all three-port sequence cartridges are interchangeable, sharing the same flow path and cavity dimensions for a given frame size. Key features include a main stage orifice protected by a 150-micron stainless steel screen and an additive pressure feature at port 3 that should not exceed 5000 psi (350 bar). However, it is not recommended for load-holding applications due to potential spool leakage. The valve can be adjusted throughout its full range using W or Y controls unless specified with a special setting, which then represents its maximum setting. Cartridges with EPDM seals are specifically designed for systems using phosphate ester fluids and should not be exposed to petroleum-based substances. The RSFCODN incorporates Sun's floating style construction to reduce internal binding risks from excessive installation torque or machining variations of cavity/cartridge. It has a capacity of 30 gpm (120 L/min) and operates at pressures up to 5000 psi (350 bar), with typical response times around 10 ms and maximum leakage of 3 in\u00b3/min at 1000 psi (50 cc/min at 70 bar). The valve requires specific installation torques and adjustments, including an internal hex size adjustment screw and locknut specifications for secure setup.
The Sun Hydraulics RSFCODN (RSFCODN) is a pilot-operated, balanced piston sequence valve designed to supply a secondary circuit with flow once the inlet port 1 pressure surpasses the valve setting. It effectively controls pressure at port 1 relative to the drain port 3, remaining unaffected by back pressure at port 2 up to the valve setting. This makes it suitable for regulating pressure in scenarios where there is pressure in the return line, serving as an alternative to two-port relief valves. The RSFCODN is part of a range where all three-port sequence cartridges are interchangeable, sharing the same flow path and cavity dimensions for a given frame size. Key features include a main stage orifice protected by a 150-micron stainless steel screen and an additive pressure feature at port 3 that should not exceed 5000 psi (350 bar). However, it is not recommended for load-holding applications due to potential spool leakage. The valve can be adjusted throughout its full range using W or Y controls unless specified with a special setting, which then represents its maximum setting. Cartridges with EPDM seals are specifically designed for systems using phosphate ester fluids and should not be exposed to petroleum-based substances. The RSFCODN incorporates Sun's floating style construction to reduce internal binding risks from excessive installation torque or machining variations of cavity/cartridge. It has a capacity of 30 gpm (120 L/min) and operates at pressures up to 5000 psi (350 bar), with typical response times around 10 ms and maximum leakage of 3 in\u00b3/min at 1000 psi (50 cc/min at 70 bar). The valve requires specific installation torques and adjustments, including an internal hex size adjustment screw and locknut specifications for secure setup.
Pilot-operated, balanced piston sequence valves will supply a secondary circuit with flow once the pressure at the inlet (port 1) has exceeded the valve setting. The pressure setting of a sequence valve controls the pressure at port 1 relative to the pressure at the drain (port 3). These valves are insensitive to back pressure at port 2 (sequence), up to the valve setting. They may be used to regulate pressure in place of 2-port relief valves if there is pressure in the return line.
- All 3 port sequence cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size).
- Pilot flow continues to increase as the pressure at port 1 (inlet), relative to the pressure at port 3 (drain), rises above the valve setting.
- The main stage orifice is protected by a 150 micron stainless steel screen.
- Pressure at port 3 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
- Not suitable for use in load holding applications due to spool leakage.
- W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 30 gpm120 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Response Time - Typical | 10 ms10 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 3 in³/min.@1000 psi50 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .50 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ
Additional Resources
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Sun Cartridges with EPDM Seals
- Sun Expands Corrosion-Resistant Solutions
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Sequence Valves Technical Tips
- Manufacturing Sun Cartridge Cavities
- Sequence Valves
- Sun Model Code Explanation; 999-901-334
- Cavity Information (S-171) and Tooling
- Cartridges: Materials of Construction
- Fluid and Temperature Recommendations
- Performance Data
- Sun's Floating Style Screw-In Cartridge
- Units of Measure, Settings, and Conversions
Notes:
- For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.