You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RSJCKCN


$467.31 USD
  • SUN HYDRAULICS
  • Material:RSJCKCN
  • Model:RSJC-KCN
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RSJCKCN (RSJCKCN) is a pilot-operated, balanced piston sequence valve designed to supply a secondary circuit with flow once the pressure at the inlet port 1 exceeds the valve setting. This valve variant is insensitive to back pressure at port 2, up to the valve setting, and can regulate pressure in place of 2-port relief valves if there is pressure in the return line. The RSJCKCN features interchangeable 3-port sequence cartridges that maintain consistent flow paths and cavity sizes for a given frame size. It incorporates a stainless steel screen to protect the main stage orifice and can handle pressures up to 5000 psi (350 bar) at port 3, which adds directly to the valve setting at a 1:1 ratio. Notably, this model is not suitable for load holding applications due to spool leakage. The RSJCKCN utilizes Sun's floating style construction to minimize internal binding risks caused by excessive installation torque or machining variations. It supports W and Y controls with adjustable settings throughout their full range unless a special setting is specified, which represents the maximum setting of the valve. The sequence valve has a capacity of 120 gpm (480 L/min) and operates effectively within its maximum operating pressure of 5000 psi (350 bar). It features an adjustment mechanism requiring approximately five clockwise turns to increase settings, with specific torque requirements for installation and locknut adjustments. Additionally, it includes a Viton seal kit option for enhanced durability. With these features, the RSJCKCN provides reliable performance in applications requiring precise control over secondary circuit flow based on inlet pressure conditions.

Pilot-operated, balanced piston sequence valves will supply a secondary circuit with flow once the pressure at the inlet (port 1) has exceeded the valve setting. The pressure setting of a sequence valve controls the pressure at port 1 relative to the pressure at the drain (port 3). These valves are insensitive to back pressure at port 2 (sequence), up to the valve setting. They may be used to regulate pressure in place of 2-port relief valves if there is pressure in the return line.

  • All 3 port sequence cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size).
  • Pilot flow continues to increase as the pressure at port 1 (inlet), relative to the pressure at port 3 (drain), rises above the valve setting.
  • The main stage orifice is protected by a 150 micron stainless steel screen.
  • Pressure at port 3 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
  • Not suitable for use in load holding applications due to spool leakage.
  • W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-19A
Series4
Capacity120 gpm480 L/min.
Factory Pressure Settings Established at4 gpm15 L/min.
Maximum Operating Pressure5000 psi350 bar
Control Pilot Flow15 - 20 in³/min.0,25 - 0,33 L/min.
Response Time - Typical10 ms10 ms
Maximum Valve Leakage at 110 SUS (24 cSt)5 in³/min.@1000 psi80 cc/min.@70 bar
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size1 5/8 in.41,3 mm
Valve Installation Torque350 - 375 lbf ft474 - 508 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight3.10 lb1,40 kg
Seal kit - CartridgeViton: 990-019-006

Show FAQ

Additional Resources