SUN HYDRAULICS
RVEBJWV

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RVEBJWV (RVEBJWV) is a three-port, normally closed modulating element with an integrated relief function, designed to provide dual functionalities when paired with an external orifice. The primary role of this component is to act as a bypass compensator, regulating priority flow into a circuit based on the specifications of the external orifice, while any excess input flow is directed to the tank port 2. Additionally, should the pressure at inlet port 1 exceed the preset valve threshold, it functions as a conventional relief valve. This model features a compensating pressure across all ranges set at 120 psi (8 bar). The performance curve of the RVEBJWV plots system pressure against the differential pressure created by the valve across the control orifice, with various curves representing different bypass flows\u2014highlighting that valve capacity and performance are contingent upon bypass flow rather than control flow. This model can be adjusted using W or Y controls, offering full-range adjustability unless a specific maximum setting is specified. Key specifications include a cavity type T-2A series 2 with a capacity of 20 gpm (80 L/min), maximum operating pressure of 5000 psi (350 bar), and typical response time of 10 ms. The valve's maximum leakage at 110 SUS (24 cSt) is rated at 3 in\u00b3/min (50 cc/min) under conditions of 1000 psi (70 bar). Installation requires specific torque settings for both the valve and locknut components. The unit weighs approximately 0.70 lb (0.30 kg) and utilizes Viton seals in its cartridge seal kit configuration.