SUN HYDRAULICS
RVEBKAV

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RVEBKAV (RVEBKAV) is a three-port normally closed modulating element with relief capabilities, designed to provide dual functions when paired with an external orifice. This product serves as a bypass compensator, regulating priority flow into the circuit based on the external orifice's specifications. Any input flow exceeding this priority flow is redirected to tank port 2. Additionally, if pressure at inlet port 1 surpasses the valve's predetermined setting, it functions as a standard relief valve. The valve's compensating pressure across all ranges is set at 120 psi (8 bar). Its performance curve illustrates system pressure against the pressure differential created across the control orifice, with curves representing various bypass flows\u2014where capacity and performance depend solely on bypass flow rather than control flow. The RVEBKAV can be adjusted throughout its complete range using W or Y controls unless specified otherwise for a special setting that indicates the maximum valve setting. It features a cavity T-2A series 2 design and boasts a capacity of up to 20 gpm (80 L/min), with factory pressure settings established at 4 gpm (15 L/min). The maximum operating pressure reaches up to 5000 psi (350 bar) and has a typical response time of 10 ms. Maximum valve leakage at 110 SUS (24 cSt) is measured at 3 in\u00b3/min (50 cc/min). The adjustment screw includes an internal hex size of 5/32 in., while installation torque ranges from 45 to 50 lbf ft. This model weighs approximately .70 lb (0.30 kg) and utilizes Viton seal kits for optimal performance and reliability.