SUN HYDRAULICS
RVEBNWV

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RVEBNWV (RVEBNWV) is a three-port normally closed modulating element with relief capabilities, designed to offer dual functionality when paired with an external orifice. This component acts primarily as a bypass compensator, regulating priority flow into a circuit as determined by the external orifice, while any excess input flow is diverted to the tank port 2. Additionally, if the pressure at inlet port 1 exceeds the valve's setting, it functions as a standard relief valve. The compensating pressure for all ranges is maintained at 120 psi (8 bar). Performance curves illustrate system pressure on the X-axis and the pressure differential across the control orifice on the Y-axis, highlighting various bypass flows that determine valve capacity and performance independent of control flow. The RVEBNWV features adjustable settings via W and Y controls, which can be specified with or without a special setting\u2014without which allows full range adjustment. The factory pressure settings are calibrated at 4 gpm (15 L/min), with a maximum operating pressure of 5000 psi (350 bar) and typical response time of 10 ms. Maximum valve leakage at 110 SUS (24 cSt) is limited to 3 in\u00b3/min at 1000 psi (50 cc/min at 70 bar). Physical specifications include a valve hex size of 1-1/8 in. (28.6 mm), an installation torque requirement of 45-50 lbf ft (61-68 Nm), and an adjustment screw internal hex size of 5/32 in. (4 mm). The model weighs approximately .70 lb (.30 kg) and uses Viton seal kits for cartridge sealing needs.