You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RVGDKHN


$363.36 USD
  • SUN HYDRAULICS
  • Material:RVGDKHN
  • Model:RVGD-KHN
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RVGDKHN (RVGDKHN) is a ventable, pilot-operated, balanced piston relief cartridge with an external drain, designed for precise pressure regulation in hydraulic systems. This valve remains normally closed until the inlet port 1 reaches a pre-set pressure, at which point it opens to tank port 2 to throttle flow and maintain the desired pressure. It includes a vent port 3 for remote control and a drain port 4 that ensures insensitivity to back pressure. Known for its accuracy and low-pressure rise versus flow, this valve operates smoothly and quietly with moderate speed. This relief cartridge can handle maximum pressures at port 2, making it ideal for cross-port relief circuits; however, users should be mindful of spool leakage in such applications. The main stage orifice is safeguarded by a 150-micron stainless steel screen. It is not recommended for load-holding due to potential leakage. The pressure at port 4 directly adds to the valve setting at a 1:1 ratio but should not exceed 5000 psi (350 bar). The Sun floating style construction minimizes binding risks from excessive installation torque or machining variations. The RVGDKHN fits into cavity T-23A and belongs to the Series 3 capacity range of up to 60 gpm (240 L/min). It operates under a maximum pressure of 5000 psi (350 bar) with control pilot flow between 15 - 20 in\u00b3/min (0.25 - 0.33 L/min) and typical response time of around 10 ms. The valve exhibits minimal leakage at maximum conditions and allows adjustment through clockwise turns up to five times. Installation requires specific torque settings, ensuring secure and efficient use across various hydraulic applications where precise pressure control is essential.

Ventable, pilot-operated, balanced piston relief cartridges with external drain are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. They provide a vent port (port 3) that connects between the main piston and pilot stage to provide for remote control by other pilot or 2-way valves and a drain (port 4) that makes them insensitive to back pressure. These valves are accurate, have low pressure rise vs. flow, they are smooth and quiet, and are moderately fast.

  • Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
  • Main stage orifice is protected by a 150 micron stainless steel screen.
  • Not suitable for use in load holding applications due to spool leakage.
  • Pressure at port 4 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-23A
Series3
Capacity60 gpm240 L/min.
Factory Pressure Settings Established at4 gpm15 L/min.
Maximum Operating Pressure5000 psi350 bar
Control Pilot Flow15 - 20 in³/min.0,25 - 0,33 L/min.
Response Time - Typical10 ms10 ms
Maximum Valve Leakage at 110 SUS (24 cSt)4 in³/min.@1000 psi65 cc/min.@70 bar
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size1 1/4 in.31,8 mm
Valve Installation Torque150 - 160 lbf ft203 - 217 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight1.60 lb0,70 kg
Seal kit - CartridgeViton: 990-023-006

Show FAQ

Additional Resources