SUN HYDRAULICS
SQFBJBN
$134.03 USD
- SUN HYDRAULICS
- Material:SQFBJBN
- Model:SQFB-JBN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics SQFBJBN (SQFBJBN) is a kickdown sequence valve designed to open completely and maintain an unrestricted flow path from port 1 to port 2 once the inlet pressure exceeds the valve setting. This valve is particularly suited for applications on the actuator side of a hydraulic system, requiring flow cessation for reset. It features a stainless steel screen protecting the main stage orifice, ensuring durability and reliability. With a maximum operating pressure of 5000 psi (350 bar), it incorporates Sun's floating style construction, reducing the risk of internal binding due to installation torque or machining variations. The valve's cavity size is T-2A, supporting a capacity of up to 30 gpm (120 L/min), with factory pressure settings established at the kickdown point. It offers a response time of approximately 25 milliseconds and minimal leakage at maximum viscosity. The adjustment mechanism allows for up to five clockwise turns to increase settings, with specific torque requirements for installation and locknut adjustments provided. While not recommended for load-holding applications, its functional interchangeability across all three-port sequence cartridges makes it versatile within its series frame size.
The Sun Hydraulics SQFBJBN (SQFBJBN) is a kickdown sequence valve designed to open completely and maintain an unrestricted flow path from port 1 to port 2 once the inlet pressure exceeds the valve setting. This valve is particularly suited for applications on the actuator side of a hydraulic system, requiring flow cessation for reset. It features a stainless steel screen protecting the main stage orifice, ensuring durability and reliability. With a maximum operating pressure of 5000 psi (350 bar), it incorporates Sun's floating style construction, reducing the risk of internal binding due to installation torque or machining variations. The valve's cavity size is T-2A, supporting a capacity of up to 30 gpm (120 L/min), with factory pressure settings established at the kickdown point. It offers a response time of approximately 25 milliseconds and minimal leakage at maximum viscosity. The adjustment mechanism allows for up to five clockwise turns to increase settings, with specific torque requirements for installation and locknut adjustments provided. While not recommended for load-holding applications, its functional interchangeability across all three-port sequence cartridges makes it versatile within its series frame size.
Kick-down sequence valves will kick completely open and remain open once the pressure at the inlet (port 1) exceeds the valve setting, creating an unrestricted flow path from port 1 to port 2 (sequence). The pressure setting at port 1 is relative to the drain (port 3). The valve remains open as long as the pressure at port 1 exceeds the pressure at port 2. To reset the valve, pressure at port 1 must fall below the setting of the valve, flow from port 1 to port 2 must cease, and pressure at port 2 must be equal to or greater than the pressure at port 1.
- All 3 port sequence cartridges are physically and functionally interchangeable (i.e. same flow path, same cavity for a given frame size).
- Should not be used in load holding applications.
- The main stage orifice is protected by a 150 micron stainless steel screen.
- Pressure at port 3 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
- Intended for use on the actuator side of the system as flow through the valve must cease for the valve to reset. If used on the pump side of a system, pump flow must be shut off for the valve to reset.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 30 gpm120 L/min. |
| Factory Pressure Settings Established at | Kick down pointKick down point |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 25 ms25 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 3 in³/min.50 cc/min. |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .50 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ
Additional Resources
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Sun Cartridges with EPDM Seals
- Sun Expands Corrosion-Resistant Solutions
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Sequence Valves Technical Tips
- Manufacturing Sun Cartridge Cavities
- Sequence Valves
- Sun Model Code Explanation; 999-901-334
- Cavity Information (S-171) and Tooling
- Cartridges: Materials of Construction
- Fluid and Temperature Recommendations
- Performance Data
- Sun's Floating Style Screw-In Cartridge
- Units of Measure, Settings, and Conversions
Notes:
- For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.