SUN HYDRAULICS
SXCAKCV

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics SXCAKCV (SXCAKCV) is a direct-acting sequence valve designed to supply a secondary circuit with flow once the inlet port 1 pressure surpasses the valve setting. This model is particularly suitable for load holding applications due to its capability to control the pressure at port 1 relative to the drain port 3. The SXCAKCV features three-port sequence cartridges that are physically and functionally interchangeable, ensuring compatibility across various setups with the same flow path and cavity size. It is crucial that port 3 remains connected as a blocked drain can result in malfunction due to reciprocating seal weepage. The valve setting at port 3 is directly additive at a 1:1 ratio, with a maximum allowable pressure of 5000 psi (350 bar). The SXCAKCV incorporates Sun's floating style construction, minimizing internal part binding from excessive installation torque or machining variations. With a capacity of 15 gpm (60 L/min) and factory pressure settings established at 2 in/min (30 cc/min), this valve operates effectively under a maximum operating pressure of 5000 psi (350 bar). It boasts quick response times typically around 2 ms and has minimal leakage at reseat, limited to 10 drops/min (0.7 cc/min). For installation, it requires a torque of between 30 - 35 lbf ft (41 - 47 Nm) for the valve and between 80 - 90 lbf in (9 - 10 Nm) for the locknut. The model weighs approximately .30 lb (.15 kg), and uses Viton seals identified by cartridge number: 990011006.